 The RedMAX™ AN-100UX base station is a high powered version of Redline's popular RedMAX™ 100U. The AN-100UX is designed in compliance with WiMAX standards to be fully interoperable with a range of WiMAX Forum Certified® devices. With an industry leading 36 dBm of power, the AN-100UX significantly extends capacity and range for fixed and nomadic wireless broadband access to information, wireless video surveillance, wireless data acquisition and wireless smart grid connectivity. Its extremely low latency ensures reliable delivery of delay-sensitive services such as circuit switched voice, Voice-over-Internet Protocol (VoIP), video and prioritized data traffic. Uplink sub-channelization automatically gives each subscriber the highest throughput possible under varying subscriber loading conditions. A full suite of Quality of Service (QoS) controls can be applied individually and "on-the-fly" to each subscriber according to their Service Level Agreement (SLA). Available in 3.3 GHz – 3.6 GHz and 3.6 GHz – 3.8 GHz bands, the RedMAX™ AN-100UX can be deployed in clusters of up to six (60 degree) sectors to form high capacity, multi-sector cell sites. Its GPS time synchronization feature facilitates tight frequency reuse enabling more efficient spectrum and channels usage when operating Time Division Duplex (TDD) radios in close proximity. Each RedMAX™ AN-100UX will support up to 511 users, for a total capacity of more than 3000 subscribers per site. The RedMAX™ AN-100UX is fully field upgradeable by firmware download to accommodate updates and future enhancements. Over the Air (OTA) provisioning simplifies control, improves customer service and lowers cost. Its robust design is highly reliable and meets stringent carrier-class Network Equipment Building System (NEBS) Level 3 requirements making it the perfect choice for mission critical deployments. Easy and economical to deploy, fully featured and scalable, the RedMAX™ AN-100UX base station is the ideal solution for any WiMAX access network where high capacity and range is required. 
| System Capability: | LOS, Optical LOS, non LOS Cellular-based point-to-multipoint | | RF Band: | 3.3-3.6 GHz, 3.6-3.8 GHz | | Channel Size: | 3.5 MHz, 7 MHz | | Spectral Efficiency: | Up to 5 bps/Hz (over the air) | | Sector Capacity: | 18 Mbps (7 MHz channel size); 9 Mbps (3.5 MHz channel size) user rates
37,400 packets per second (tested with 64 byte packets) | | Latency: | 6-18 msec (depends on channel size, OFDM frame duration) | | Maximum Tx Power: | +36 dBm (region specific with HTB transceiver) | | Rx Sensitivity: | Better than -98 dBm @ BPSK 1/2 (based on BER of 1x10e-6) | | IF Cable: | Maximum length up to (190 m) using Redline recommended high-grade IF cable | | Scheduling Classes: | UGS, rtPS (for VoIP), nrtPS, Best Effort | | Network Attributes: | Layer 2 bridging; 802.1Q (VLAN tagging, QinQ, VLAN filtering); wireless VPN DHCP Option 82 and PPPoE PADI tagging for scaleable service activation and provisioning | | Modulation/Coding Rates: | Auto-select modulation: BPSK, QPSK, 16 QAM, 64 QAM | | Auto-select coding: | 1/2, 2/3, 3/4 | | Over the Air Encryption: | DES, 3DES | | Synchronization: | Input for external 1 PPS GPS clock signal | | MAC: | 802.16-2004 certified PMP 802.16-2004 packet convergence sub-layer mode TDMA Access | | Range: | Up to 72 km (45 mi) | | Duplex Technique: | TDD (time division duplex) HD-FDD (half duplex frequency division duplex) | | Wireless Transmission (PHY): | 256 FFT Orthogonal Frequency Division Multiplexing (OFDM) (Uplink Sub-channelization) | | Network Connections: | Standard: 10/100 Ethernet (RJ-45); separate ethernet ports for management and data traffic | | System Configuration: | HTTP (Web) interface, SNMP CLI via Telnet and Local Console | | Network Management: | SNMP, standard and proprietary MIBs Full management by Redline Management Suite (RMS) | | Power Requirements: | Optional AC (Auto-sensing 90-264VAC, 50/60 Hz) or DC (Auto-sensing 21 - 60 VDC) | | Redundant Power: | Optional external AC or DC available with RPS (automatic fail-over) | | Compliance: | EMC: EN 301 489-1, EN 301 489-4, EN 55022/CISPR 22 RF: EN 302 326, Industry Canada: RSS-192, FCC: Parts 90 & 15 (for USA 3.65 GHz operation) | | Safety: | IEC 60950-1, UL 60950-1 | | Operating Temperature: | IDU: 0 C to 40 C; ODU: -40 C to 60 C | | Dimensions: | IDU: 17 x 12 x 1.75 in (431.8 x 304.8 x 44.45 mm); ODU: 19 x 8 x 4 in (482 x 203 x 101 mm) | | Weight: | IDU: 6.5 lb (2.9 kg); ODU: 12 lb (5.4 kg) | | Humidity: | Up to 90% non-condensing |
|
